Midea 35 Pint Cube Dehumidifier Review: Worth It? (November 2026)
The Midea Cube 35 Pint is a strong buy for a damp basement up to 3,500 sq ft, because its 4.2-gallon tank runs up to 3X longer between empties and its lift-and-twist body nests down small when the air dries out. Pick a different model if you want the lowest price per pint or a simpler non-smart unit.
On this page (7 sections)
The Midea Cube 35 Pint is worth buying for a basement or whole floor up to 3,500 sq ft, mainly because its 4.2-gallon tank lets it run up to three times longer than a standard dehumidifier before you empty it. The extendable lift-and-twist body is the second reason: it works at full height, then nests down to about half size when the air is dry and you want the floor back.
This Midea 35 Pint Cube dehumidifier review weighs the daily specs against the trade-offs. The short version: it's the smartest big-tank pick here, but it costs more and weighs more than a basic bucket unit.
Buy it for a damp open basement you'll control from your phone. Skip it for a single small bedroom or a tight budget.
The Midea Cube 35 Pint at a glance
The Cube 35 Pint is a high-capacity basement unit with a smart twist. It pulls 35 pints a day, adjusts humidity from 35% to 85% and pairs with Wi-Fi, Alexa and Google Assistant.
The lift-and-twist body is the feature that sets it apart from every other model in this price band.
Midea Cube 35 Pint Dehumidifier: Best for basements with Wi-Fi control
- 35 pints per day
- 3,500 sq ft coverage
- 4.2-gallon removable tank
- Lift-and-twist extendable body
- Wi-Fi, Alexa and Google Assistant control
A big-tank basement dehumidifier that collapses to about half its working size for storage. Wi-Fi and voice control let you check humidity without walking downstairs.
Pros
- 4.2-gallon tank runs up to 3X longer than a conventional bucket
- Extendable body nests down to about half size for storage
- Drain hose and garden hose adapter included for continuous draining
- Wi-Fi app plus Alexa and Google Assistant control
Cons
- 39.6 lb is heavy to carry up and down stairs
- Only two fan speeds
- Pricier than a plain 35 pint bucket model
At 14.45 in deep, 14.76 in wide and 14.96 in tall in nested form, it fits in a corner or closet without dominating the room. Extended, it holds 4.2 gallons of water.
That's the trade you make for the longer run time.
Who this dehumidifier suits
Buy the Cube 35 Pint if your basement is damp, open and up to 3,500 sq ft, and you'd rather check humidity from your phone than walk down a flight of stairs to read a dial. It also suits anyone who wants to pack the unit away in the off-season without giving up a permanent corner of the room.
Skip it if you're treating one small, closed bedroom. A 35 pint unit is more capacity than that space needs, and the 39.6 lb body is heavier than a small-space model to move around.
The specs that matter in daily use
The 4.2-gallon tank and 35 pint daily rate do the real work. Midea rates the Cube for 35 pints a day (similar to 50 PT on the old 2012 DOE scale) and covers 3,500 sq ft.
In plain terms, it's built for a whole basement rather than a bathroom.
The tank is the headline. Midea says the Cube's bucket is up to 3X larger than a conventional dehumidifier's, so you empty it far less often.
For a damp basement in summer, that can mean going from a daily chore to a twice-weekly one.
Coverage matters as much as capacity. A 3,500 sq ft rating assumes open, typical conditions, so a basement split into several closed rooms may still need air circulation between them.
Run a fan or leave interior doors open so the drier air can reach every corner.
Midea lists two fan speeds and a continuous operation mode. Low speed keeps the noise down for evenings upstairs; high speed moves more air when the basement is at its wettest.
The 188 cubic centimeter per minute airflow figure is modest, so this unit is better at steady drying than quick blasts.
It also includes a removable, washable air filter. A clean filter keeps airflow up and the compressor working efficiently.
Pull it and rinse it every few weeks during heavy-use months.
The 35% to 85% humidity range gives you room to set a target that feels comfortable. Most basements do well in the 45% to 55% band.
Setting it much lower keeps the compressor running longer and uses more energy.
Setting up the Cube 35 Pint
Setup is a matter of choosing a drain method and connecting the unit. Decide first whether you'll empty the bucket or run continuous drainage.
That choice changes where the unit goes.
For bucket use, lift and twist the body to its extended form so the 4.2-gallon tank sits at full capacity. Place the unit on a flat, level floor, leaving room for air to move around it.
The multi-directional air intake needs clearance on more than one side.
For continuous draining, remove the tank and fit the included drain hose. Run the hose to a floor drain, sink, window or door, keeping a gentle downward slope the whole way.
The kit also includes a garden hose adapter in the tank, so you can attach a longer standard garden hose for a farther drain point.
Plug it in and open the SmartHome app on iOS or Android. Pair the unit over Wi-Fi, then set your humidity target.
Once connected, Alexa and Google Assistant let you change settings by voice, and the app shows humidity and water level without a trip downstairs.
The included components are the air filter, drain hose, garden hose adapter, tank and user manual. Check the manual's clearance and electrical guidance before you settle on a spot.
Care and upkeep for the Midea Cube
Upkeep is simple: keep the filter clean, the tank fresh and the drain clear. These three habits cover most of what the Cube needs.
Rinse the washable air filter every few weeks in heavy-use months. A clogged filter chokes airflow and makes the compressor work harder for less drying.
Let it dry fully before sliding it back in.
Empty and rinse the bucket when you use bucket mode. Standing water left in a warm tank can grow a musty film.
A quick wipe with a mild cleaner and a full dry between fills keeps odors down.
If you run continuous drainage, check the hose for kinks and make sure the end stays below the unit. A hose that loops up can trap water and back up into the tank area.
Clear any debris from the drain point now and then.
Clean the exterior with a soft, damp cloth. The plastic body wipes down easily.
Wipe the humidity sensor area gently so it keeps reading accurately.
Store the Cube in nested form when the basement dries out. Nesting halves its footprint and makes it easy to tuck into a closet until next season.
Run the tank and hose dry before storing it to avoid mildew.
The trade-offs to know before you buy
The main trade-offs are weight, price and a limited fan range. The Cube 35 Pint weighs 39.6 lb.
That's heavy for one person to carry up and down stairs, and it's heavier than the smaller VEAGASO unit below.
It also costs more than a plain 35 pint bucket dehumidifier. You're paying for the big tank, the nesting body and the Wi-Fi controls.
If you don't need those, a simpler unit does the core drying job for less.
Two fan speeds is a modest range. Some rivals offer more control over airflow, and the 188 cubic centimeter per minute figure suggests this unit is built for steady background drying rather than fast moisture removal.
Wi-Fi control depends on your home network and the app. When the connection drops, you'll fall back to the onboard controls.
That's fine, but it's worth knowing before you count on remote checks.
The bucket is large and that's mostly a plus, but a full 4.2-gallon tank is heavy to lift out. Continuous drainage avoids that entirely, so plan a drain point if lifting is a concern.
Alternatives worth comparing
Three models compete on different strengths: the smaller Midea Cube, a larger Waykar and a lighter VEAGASO. Each one beats the Cube 35 Pint on a specific need.
Midea Cube 20 Pint: the smaller sibling
The 20 pint Midea Cube is the right pick for a smaller, less damp space. It removes less water per day than the 35 pint model, so it suits a single room or a smaller basement rather than a whole open floor.
The body design and smart controls are similar, so the choice comes down to coverage. Our Midea Cube 20 Pint vs 35 Pint comparison walks through the daily difference.
If your space is under about 1,500 sq ft and only mildly damp, the 20 pint version is the easier buy.
Waykar 80 Pint: the larger-capacity option
The Waykar 80 Pint removes more than twice the water per day and covers up to 5,000 sq ft. That makes it the better fit for a very large basement or an open-plan lower level that never fully dries.
It adds a 90 degree auto-swing airflow and a humidity range down to 30%, below the Cube's 35% floor. The trade-off is a bigger cabinet that is lighter overall despite its larger body.
If your basement is closer to 5,000 sq ft than 3,500, this is the stronger choice.
VEAGASO 34 to 36 Pint: the lighter, simpler unit
The VEAGASO 34 to 36 Pint is the lighter pick for a single damp room. It covers up to 2,500 sq ft and weighs far less than the Cube, so it's easier to move between rooms.
It offers three modes and a 0.53-gallon tank with a drain hose for continuous use. Its smaller tank means more frequent empties in bucket mode.
For a bedroom or a modest basement without smart controls, it's the simpler buy.
Verdict: is the Midea Cube 35 Pint worth it?
The Midea Cube 35 Pint is worth it for a damp basement up to 3,500 sq ft, especially if you want to manage humidity from your phone. Its 4.2-gallon tank and nesting body make it one of the most practical big-tank units for a home basement.
This Midea 35 pint Cube dehumidifier review rates it a solid 8 out of 10.
Buy it if your basement is open, moderately to heavily damp and you'll set a drain hose or accept fewer empties. The Wi-Fi and voice control are genuine conveniences when the unit sits on another floor.
Skip it and choose the 20 pint Midea Cube for a smaller, mildly damp room. Pick the Waykar 80 Pint if your space runs to 5,000 sq ft.
Go with the VEAGASO 34 to 36 Pint if you want a lighter unit for one room without smart features. For the larger Midea, see our Midea 50 Pint Dehumidifier review.
And if a compact brand like VEAGASO appeals, our KNKA dehumidifier review covers another small-space option. Also read the Midea Cube 20 Pint dehumidifier review for the smaller model in detail.
Frequently asked questions
How many square feet does the Midea Cube 35 Pint cover?
Midea rates it for 3,500 sq ft. That figure assumes open, typical conditions, so a closed basement with several rooms may need a second unit or better air circulation to hold a set humidity level.
Does the Midea Cube 35 Pint work with Alexa?
Yes. The unit is Wi-Fi enabled and works with Alexa and Google Assistant, so you can change settings by voice.
You can also use the SmartHome app on iOS or Android to read humidity and water level from another room.
How long can the Midea Cube 35 Pint run before I empty the tank?
Midea says the 4.2-gallon tank lets the Cube run up to 3X longer than a conventional dehumidifier before you empty it. How long that is in your space depends on how wet the air is and how high you set the humidity target.
Can the Midea Cube 35 Pint drain continuously?
Yes. Remove the bucket, attach the included drain hose and run it to a floor drain, sink, window or door.
The kit also includes a garden hose adapter, so you can swap in a longer standard hose for a farther drain point.
Is the Midea Cube 35 Pint good for a bedroom?
It can work in a bedroom, though the 39.6 lb body and two fan speeds suit it better as a whole-floor unit. For a single small room, a lighter, quieter model such as the VEAGASO 34 to 36 Pint is easier to move and store.
What is the difference between the 20 pint and 35 pint Midea Cube?
The 35 pint model removes more water per day and covers a larger area than the 20 pint version. The body design and smart controls are similar, so the main choice is coverage and how often you want to empty the tank.
